- Programmable 3-in-1 automotive trip computer, diagnostic scan tool, and up to 37 digital gauges in one (vehicle dependent)
- Watch fuel consumption, cost-per-mile, coolant temperature, engine speed, horsepower, and much more in real time
- Works on all 1996 or newer OBDII cars, including gas, diesel, propane and hybrid vehicles
- Checks for Diagnostic Trouble Codes (DTCs), clears the codes, and can turn off the "Check Engine" light
- No tools required for installation, small size fits nearly anywhere in the vehicle
Expandable Add-A-Gauge Technology
The ScanGaugeII has been redesigned with expandable Add-A-Gauge (aka XGauge) technology. Add to the original 12 gauges by customizing the ScanGaugeII to monitor up to 25 more--depending on your specific vehicle's sensor design. Four gauges can be displayed simultaneously an! d can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time. If there is a young driver in the house or friends borrow your car, the ScanGaugeII can record speeds of up to 158 mph and store the information for you to view later, so you will know just how fast your young driver or friend was going last night. If the unit was disconnected, you'll know: An indicator will be displayed in the trip data.
ScanGaugeII mounts easily to your dash. |
Gauges include:
- Horsepower
- Fuel Consumption Rate to 1/100th per gallon/liter
- Vehicle speed (MPH)
- Fuel Economy
- Cost Per! Mile/Cost Per Trip
- Manifold Pressure (not available ! on some vehicles)
- Battery Voltage
- Engine Load
- Coolant Temperature
- Throttle Position
- Intake Air Temperature
- Ignition Timing
- Engine Speed (RPM)
- O2 Sensor Data
- Fuel Trim
- Hybrid Battery Charge (for Toyota Prius and Ford Escape)
- And many more, depending on your vehicle's sensor design
ScanGaugeII makes diagnostics easy. View Larger |
The ScanGaugeII includes a diagnostic scan tool that can check for Diagnostic Trouble Codes (DTCs), clear the codes, and turn off the "Check Engine" light on 99% of 1996 and newer vehicles. (However, this feature may not work on some trouble codes in Dodge vehicles.) If any DTCs are found, the ScanGa! uge will show how many there are as well as the codes themselves. Then you can use the Internet or repair manual to find out which is the failed part is, so you can repair it yourself or know what needs to be fixed at the mechanic's shop.
Multifunction Trip Computer
Four sets of data are automatically recorded on the trip computer: Current, Today, Previous Day, and Tank Trip. The "current" trip restarts after the engine has been off for more than 3 minutes. The "today" trip restarts after the vehicle has not moved for 9 hours, and the data from "today" is moved to "previous day" when you restart the car, so you don't have to reset the computer every time you begin a trip. "Tank trip" resets when you fill up the tank. It can provide you with "to empty" data and other useful information, which can be viewed any time during the trip. The trip computer also integrates information from the Cost Per Mile gauge. Simply enter how much you paid per gallon or! liter of fuel, and the ScanGauge will automatically calcula! te the c ost of your trips as you drive. The ScanGaugeII features 12 individually stored parameters, including:
ScanGaugeII features 63 backlit colors. View Larger |
- Maximum Speed
- Average Speed
- Maximum Coolant Temperature
- Maximum RPM
- Driving Time
- Driving Distance
- Fuel Used
- Fuel Cost
- Trip Fuel Economy
- Distance to Empty
- Time to Empty
- Fuel to Empty
A large, high-contrast LCD display makes viewing the information easy, and both the display and keys are backlit and can be set to off, low, or high. With 63 possible colors, user settings, tank trip data, and vehicle settings that are automatically saved, and up! to 10 user commands that can be stored and recalled, the ScanGaugeII can be easily customized to suit your needs.